1. It is scientific and focused on the reviews of related problems in International Journal of Management and Business (IJMB). Besides, it must be original and based on the research and contributive literature review for the development of Systems Engineering and Information Technology studies.
2. Articles should be original, research-based, unpublished and not under review for possible publication in other journals.
3. It consists of title, author’s name, institution, email address, abstract, key words, content and references.
4. The title must be clear, precise and no more than 14 words.
5. The author does not need to include the academic title.
6. Manuscript should be typed in MS document format with Times New Roman, size 10 pts, one f space, A4 paper roughly 6 to 15 pages.
7. All submission must include 75-200 words abstract and 3-5 keywords. The abstract of research paper should contain title, purpose, method, and research finding. Meanwhile the abstract of non-research paper includes title, purpose, and discussion.
8. It must be typed in Microsoft Word with RTF (Rich Text Format) or Docx. (Word Document).
9. The paper will be reviewed and edited without changing any substantial contents
10. The rejected paper will be notified to the author via website and email.
11. Bibliographical reference must be noted in bodynote and bibliography.
12. Download template IJMB here

The manuscript is written in A4 paper size with a minimum page size of 6 pages, maximum of 15 pages, including tables and drawings, and with reference to the writing procedure as set forth in this paper

Title

Written using Times New Roman 15 Font (Max 12 words). This is your opportunity to attract the reader’s attention. Remember that readers are the potential authors who will cite your article. Identify the main issue of the paper within the title. Begin with the subject or highlight the idea of the paper. The title should be accurate, unambiguous, specific, and complete. Do not contain infrequently-used abbreviations.

The title of the paper should be in 15 pt Times New Roman and be centered. The title should have 15 pts space above and 15 pts below.

Authors Name and Affiliations

Write Author(s) names without a title and professional positions, such as: Prof, Dr, Production Manager, etc. Do not abbreviate your last/family name. Always give your First and Last names (should be at least 2 (two) words). Write a clear affiliation of all Authors. Affiliation includes the name of department/unit, (faculty), the name of the university, country. Please indicate Corresponding Author (include email address) by adding an asterisk (*) in superscript behind the name. Author names should be in 10 pt Times Roman.

Abstract and keywords :

The abstract should briefly summarize the scope, objectives, methods, data, results and conclusions of the paper. The abstract is to be in fully-justified italicized text, at the top of the paper with single column as it is here, below the author information. Use the word “Abstract” as the title, in 10-point Times, boldface type, left relative to the column, initially capitalized. The abstract is to be in 10-point, single-spaced type, and up to 250 words in length. Leave two blank lines after the abstract or list three to five keywords related to the articles.

Keywords: are written in five words which should be a subset of the paper title, written in lowercase except for abbreviations, and separated by commas.

1. Introduction

In the Introduction, the Authors should state the objectives of the work at the end of the introduction section. Before the objective, Authors should provide an adequate background (maximum 1 paragraph), and very short literatures survey/review in order to record the existing solutions/method, to show which is the best of previous researches, to show the main limitation of the previous researches, to show what do you hope to achieve (to solve the limitation), and to show the scientific merit or novelties of the paper. Avoid a detailed literature survey or a summary of the results. Do not describe the literature survey/review as author by author, but should be presented as a group per method or topic reviewed which refers to some pieces of literature. Before the objectives and after the literature review, the author must state the gap analysis or novelties statements to show why does this paper is important and what is a unique idea of this paper compared to other previous researchers' suggestions.

The content of the introduction is the answer to the question [3-7]: (1). Background, (2). Brief Literature Review, (3). The reason of this study and (4). Question of purpose.

2. Research Method

Explain the method of preparation and characterization techniques used. Describe briefly, but remain accurate as size, volume, replication and workmanship techniques. For the new method should be explained in detail so that other researchers can reproduce the experiment. While the established method can be explained by quoting a reference.

Research method should make readers be able to reproduce the experiment. Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described. Do not repeat the details of established methods.

3. Results and Discussion

The results are written based on a logical order to form a story. It shows facts / data instead of discussing the results. Tables and Figures can be used but not repeating the same data in the same image, table and text. To further clarify the description, subtitles can be used.

The results should be clear and concise. The results should summarize (scientific) findings rather than providing data in great detail. Please highlight the differences between your results or findings and the previous publications by other researchers. The discussion should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.

In the discussion, it is the most important section of your article. Here you get the chance to sell your data. Make the discussion corresponding to the results, but do not reiterate the results. Often should begin with a brief summary of the main scientific findings (not experimental results).

The following components should be covered in discussion:

• How do your results relate to the original question or objectives outlined in the Introduction section? What is your finding of research? (what/how)? 
• Do you provide interpretation scientifically for each of your results or findings presented? This scientific interpretation must be supported by valid analysis and characterization (why)? 
• Are your results consistent with what other investigators have reported (what else)? Or are there any differences?

Discussion is the basic explanation, relationship and generalization shown by the results. The description answers the research questions. If there are dubious results, then show them objectively.

4.Conclusion

In conclusion there should be no reference. The conclusion contains the facts obtained. State the application possibilities, implications and speculations as appropriate. If necessary, give suggestions for further research. Conclusions should only answer the objectives of the research. Tells how your work advances the field from the present state of knowledge. Without clear Conclusions, reviewers and readers will find it difficult to judge the work, and whether or not it merits publication in the journal. Do not repeat the Abstract, or just list experimental results. Provide a clear scientific justification for your work, and indicate possible applications and extensions. This conclusion should be provided as a paragraph. You should also suggest future experiments and/or point out those that are underway.

Acknowledgements (if any)

Recognize those who helped in the research, especially funding supporters of your research financially. Include individuals who have assisted you in your study: Advisors, Financial supporters, or may another supporter, i.e. Proofreaders, Typists, and Suppliers, who may have given materials. Do not acknowledge one of the authors' names.

References

Cite the main scientific publications on which your work is based. Cite only items that you have read. Do not inflate the manuscript with too many references. Avoid excessive self‐citations. Avoid excessive citations of publications from the same region. Check each reference against the original source (author name, volume, issue, year, DOI Number). Please use Reference Manager Applications like EndNote, Mendeley, Zotero, etc. Use other published articles in the same journal as models. The minimum number of references should be 25 references. 

Citation within the body text of the article to reference(s) must follow the numbering system. References must be presented sequentially and sorted to start from first cited reference.

1]   A. yulastri Raimon Efendi, “Effectiveness of Collaborative Problem Based Learning Model of Learning Computer Network Courses,” Proc. 5th UPI Int. Conf. Tech. Vocat. Educ. Train. (ICTVET 2018), vol. 299, no. Ictvet 2018, pp. 309–312, 2019, doi: 10.2991/ictvet-18.2019.70.

[2]  Y. I. Ambiyar, Raimon Efendi, Waskito, Surfa Yondri, “Pengembangan E-Authentic Asessment Berbasis PBL untuk Meningkatkan Kompetensi Mahasiswa dalam Pembelajaran Jaringan Komputer,” (ekayasa Sist. dan Teknol. Inf., vol. 3, no. 3, 2019.

[3]  N. Jalinus, “Pengembangan Pendidikan Teknologi dan Kejuruan dan Hubungan Dunia Kerja,” Jurnal Pendidikan Vokasi, vol. 1, no. 1. pp. 25–34, 2011.

[4]  M. Ropianto et al., “Optimization of Strategic Planning Organization in the Framework of Achievement Objectives of Education,” in 2nd International Conference on Education, Science, and Technology (ICEST 2017), doi: https://doi.org/10.2991/icest-17.2017.50.

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

1. 1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
   2. The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
   3. Where available, URLs for the references have been provided.
   4. The text is single-spaced; uses a 10-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
   5. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
   6. If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.